Adam Hall
Sono stati trovati 305 prodotti
In
evidenza
evidenza
Remember that to install a set of heavy-duty rack rails, you need the correct nuts. These Adam Hall cage nuts with M6 thread for 2 mm are made of steel for maximum durability.
Disponibile
Disponibile
€ 0,98
€ 0,66
In
evidenza
evidenza
Neatly bundle cables and clean up the stage or studio floor with this Adam Hall cable binder. Made from hook-and-loop fastening strip, this binder is 20mm-wide, 200mm-long, and comes in green.
Disponibile
Disponibile
€ 1,44
€ 1,11
In
evidenza
evidenza
Neatly bundle cables and clean up the stage or studio floor with the Adam Hall cable binder. Made from hook-and-loop fastening strip, this binder is 20mm-wide, 200mm-long, and comes in blue.
Disponibile
Disponibile
€ 1,85
€ 1,11
In
evidenza
evidenza
Use this Adam Hall hook-and-loop cable binder to keep your cables nicely bundled up and organised. This version measures 160 x 16 mm and is finished in black.
Disponibile
Disponibile
€ 1,20
€ 0,96
In
evidenza
evidenza
Neatly bundle cables and clean up the stage or studio floor with the Adam Hall cable binder. Made from hook-and-loop fastening strip, this binder is 16mm-wide, 160mm-long, and comes in blue.
Disponibile
Disponibile
€ 1,69
€ 0,87
In
evidenza
evidenza
Neatly bundle cables and clean up the stage or studio floor with the Adam Hall cable binder. Made from hook-and-loop fastening strip, this binder is 16mm-wide, 160mm-long, and comes in red.
Disponibile
Disponibile
€ 1,57
€ 0,87
This set of rack hardware accessories lets you get instantly started on building your own 19" rack. Included are M6 screws, protective rings and cage nuts.
Disponibile
Disponibile
€ 27,00
€ 26,00
In
evidenza
evidenza
Neatly bundle cables and clean up the stage or studio floor with this Adam Hall cable binder. Made from hook-and-loop fastening strip, this binder is 20mm-wide, 200mm-long, and comes in red.
Disponibile
Disponibile
€ 1,44
€ 0,81
These small yet durable rubber feett can be easily installed on a flight case or other gear to add an extra level of protection and stability.
Disponibile
Disponibile
€ 3,41
€ 3,10
In
evidenza
evidenza
This small yet durable rubber foot can be easily installed on a flight case or other gear to add an extra level of protection and stability.
Disponibile
Disponibile
€ 0,65
€ 0,38
In
evidenza
evidenza
A toolbox essential for any technician, this roll of isolation tape doesn't just offer quick fixes for electrical gear, but can be used to neatly seal, mark or bundle cables. This tape is flame resistant and self-extinguishing.
Disponibile
Disponibile
€ 3,18
€ 1,84
This durable, 2mm thick steel rack rail comes pre-drilled with 3 holes per unit offering masses of freedom in terms of configuration. This rail is a DIY rack or flight case customising essential.
Disponibile
Disponibile
€ 5,65
€ 3,44
In
evidenza
evidenza
A neat solve for suspending theatre backdrops and truss covers that don't come pre-finished with eyelets, the Holdon simply clamps onto the material without causing damage so it can be clipped where needed.
Disponibile
Disponibile
€ 3,78
€ 2,15
In
evidenza
evidenza
From securing flight cases to closing battered guitar cases, a bungee cord is every engineer and musician's best friend. The 25cm-long Adam Hall VBC4250BLK bungee cord comes in black and has been fitted with a plastic hook.
Disponibile
Disponibile
€ 3,53
€ 1,92
Neatly mount twelve XLR sockets into a 19 inch rack while taking up just 1U of space and keeps things clean and dust-free thanks to the Adam Hall 877213 rack panel.
Disponibile
Disponibile
€ 12,30
€ 9,30
Disponibile
Disponibile
€ 7,00
€ 4,90
These super-tiny yet super-strong rubber feet are easily mounted underneath your flight case or sound cabinet for optimal stability and zero risk of damage.
Disponibile
Disponibile
€ 5,60
€ 4,11
This heavy-duty rack strip is an indispensable component for your 19" rack or flight case. This durable, 2mm thick, steel rail features 3 pre-drilled holes per unit for increased installation flexibility.
Disponibile
Disponibile
€ 6,45
€ 3,44
These little rubber feett from Adam Hall are a highly protective accessory that keeps your flight case, furniture or floor free from damage.
Disponibile
Disponibile
€ 6,25
€ 4,93
This durable, 2mm thick steel rack rail comes pre-drilled with 3 holes per unit offering masses of freedom in terms of configuration. This rail is a DIY rack or flight case customising essential.
Disponibile
Disponibile
€ 4,33
€ 2,59
In
evidenza
evidenza
Disponibile
Disponibile
€ 10,50
€ 7,75
In
evidenza
evidenza
This flexible 20cm long turnaround-cable from Adam Hall helpfully provides a 5-pin male XLR at one end and a female 3-pin XLR at the other end.
Disponibile
Disponibile
€ 9,80
€ 8,45
In
evidenza
evidenza
From securing flight cases to closing battered guitar cases, a bungee cord is every engineer and musician's best friend. The 25cm-long Adam Hall VBC5250BLK bungee cord comes in black and has been fitted with a strong steel hook.
Disponibile
Disponibile
€ 4,29
€ 1,81
This durable, 2mm thick steel rack rail comes pre-drilled with 3 holes per unit offering masses of freedom in terms of configuration. This rail is a DIY rack or flight case customising essential.
Disponibile
Disponibile
€ 8,65
€ 5,90
In
evidenza
evidenza
Combined with the Adam Hall S42100 safety cable, this carabiner clip makes sure that your gear won't come crashing down. It complies with German safety standards and boasts a maximum weight capacity of 350kg.
Disponibile
Disponibile
€ 3,96
€ 3,45
In
evidenza
evidenza
The Adam Hall 4909 M8 AH pack includes eight stabilising rubber feet that each measure 38 by 22 millimetres and have a 6.5mm diameter mounting hole.
Disponibile
Disponibile
€ 10,70
€ 7,45
In
evidenza
evidenza
Almost all devices require proper ventilation and heat dissipation to maintain flawless operation. This 1U ventilation plate for your 19" rack features a perforated design to provide ample airflow.
Disponibile
Disponibile
€ 10,50
€ 6,05
In
evidenza
evidenza
The Adam Hall 4911 M4 AH pack includes four rubber feet that are 25mm high and measure 38mm in diameter.
Disponibile
Disponibile
€ 5,90
€ 4,32
This 19-inch rack tray supports non-standard gear with a depth of up to 375mm, features vented sides and comes with an upright rear edge for extra stability.
Disponibile
Disponibile
€ 35,00
€ 31,00
Manufactured by Adam Hall, this heavy-duty double rack-strip has a 45U length, features two mounting holes per unit and comes made out of durable, powder-coated steel.
Disponibile
Disponibile
€ 52,00
€ 32,00
This Heavy-Duty Rack Strip is an indispensable part of your DIY flight case or 19" rack. This durable rail is made of 2 mm thick steel and features 3 pre-drilled holes per unit for multiple installation options.
Disponibile
Disponibile
€ 10,70
€ 6,40
Since it has pre-drilled holes, this Adam Hall 8754 19" rack inlay is not only easy to install but supports various small bits of rack or flight case gear with non-standard dimensions.
Disponibile
Disponibile
€ 29,00
€ 24,75
Disponibile
Disponibile
€ 12,30
€ 7,40
Disponibile
Disponibile
€ 9,75
€ 4,88
Easily installed in any standard 19 inch rack, the Adam Hall 87475 3U panel helps mount your circuit breakers and efficiently organise your cables.
Disponibile
Disponibile
€ 44,00
€ 36,00
This 19-inch rack panel not only shields your gear, but helps keep it cool by allowing for airflow via the honeycomb-style mesh front.
Disponibile
Disponibile
€ 21,50
€ 14,90
Mount the Adam Hall 8756 rack tray in your open-top rack and gain 2U worth of room for gear like mixers and effects. Smaller bits of kit can be tied down with the included hook-and-loop fastening strip.
Disponibile
Disponibile
€ 52,00
€ 50,00
Finish your 19" rack or flight case in a professional manner by covering any open slots with this Adam Hall flat rack panel to better protect your equipment against dust, dirt and moisture. This is the 1U, steel version.
Disponibile
Disponibile
€ 9,95
€ 4,99
In
evidenza
evidenza
Lift your truss pieces the safe way using this Adam Hall 35mm stand truss adapter! It's compatible with 20-to-40cm diameter rods and features a dependable safety pin system.
Disponibile
Disponibile
€ 56,00
€ 38,00
Adam Hall introduce the PAD Eco 2 pack: a smart acoustic treatment for studio monitors that can help eliminate unwanted resonance for cleaner mixes.
Disponibile
Disponibile
€ 33,00
€ 20,60
This durable, 2mm thick steel rack rail comes pre-drilled with 3 holes per unit offering masses of freedom in terms of configuration. This rail is a DIY rack or flight case customising essential.
Disponibile
Disponibile
€ 14,40
€ 9,70
This 'turnaround' 5-pin to 3-pin DMX XLR adapter from Adam Hall comes fitted with a 5-pin M-XLR at one end and a 3-pin F-XLR at the other.
Disponibile
Disponibile
€ 8,70
€ 7,30
This Adam Hall-compiled set of rackware includes four M6 crosshead screws, four washers and four nuts that can be used to mount various bits of rack kit.
Disponibile
Disponibile
€ 8,20
€ 4,94
This durable, 2mm thick steel rack rail comes pre-drilled with 3 holes per unit offering masses of freedom in terms of configuration. This rail is a DIY rack or flight case customising essential.
Disponibile
Disponibile
€ 12,05
€ 8,10
Made by Adam Hall, this steel rack mount housing has a 2U height and ventilated top panel to ensure proper airflow.
Disponibile
Disponibile
€ 80,00
€ 74,00
This 19-inch rack panel not only shields your gear, but helps keep it cool by allowing for airflow via the honeycomb-style mesh front.
Disponibile
Disponibile
€ 20,85
€ 16,35
This universal super-clamp from Adam Hall can secure fixtures and cameras to rods, square bars and flat surfaces. Made of stainless steel and aluminium, the SCP710B clamp supports loads of up to 20kg.
Disponibile
Disponibile
€ 29,00
€ 28,00