Offerte Penn Elcom
Sono stati trovati 73 prodotti
In
evidenza
evidenza
Lo spigolo piatto Penn Elcom in acciaio color zinco dispone di 3 fori, ognuno dal diametro di 5 mm. Misura 49 x 49 mm ed è realizzato in acciaio di 1 mm di spessore.
Disponibile
Disponibile
€ 2,58
€ 1,99
In
evidenza
evidenza
Penn Elcom's SG-9407 steel flange bolt has an M6 hex head and is 16mm long. It features a self-locking design including a knurled ring.
Disponibile
Disponibile
€ 0,62
€ 0,16
The Penn Elcom C1373z neatly combines a ball corner with a corner brace. The model is 67mm long, has a 3mm interior radius and comes pre-drilled with six 5mm mounting holes.
Disponibile
Disponibile
€ 3,44
€ 2,70
In
evidenza
evidenza
Speaker clamp with a black powder coating. Has an 11 x 7 mm mounting hole.
Disponibile
Disponibile
€ 1,23
€ 0,78
In
evidenza
evidenza
Neatly bundle cables, cut down on stress and cut down on detangle-time with this Penn Elcom designed cable tie. Finished in black, this hook-and-loop cable tie is 20cm long and 1.3cm wide.
Disponibile
Disponibile
€ 1,58
€ 0,53
The Penn Elcom B1136z T-Corner Bracket has a 2mm interior radius, has been made from 1.2mm-thick steel and comes pre-drilled with 5mm mounting holes.
Disponibile
Disponibile
€ 1,96
€ 0,96
In
evidenza
evidenza
Il paraspigolo bombato Penn Elcom in acciaio color zinco dispone di 6 fori, ognuno dal diametro di 5 mm.
Disponibile
Disponibile
€ 3,50
€ 1,48
To open Penn Elcom's MOL3 butterfly latch, all you have to do is twist the automatic positioning latch. This large model has a 16mm deep offset dish as well as no less than fourteen mounting holes to guarantee a secure fit.
Disponibile
Disponibile
€ 15,50
€ 14,40
A handy addition when building custom flight cases or rack installations, the Penn Elcom AAY0327 internal mounting point is made from zinc-finished steel and punched with a pre-threaded M10 hole.
Disponibile
Disponibile
€ 5,50
€ 2,91
Disponibile
Disponibile
€ 1,77
€ 0,73
Basterà fissare la fascetta intorno al rotolo di cavi una sola volta, e per anni sarete soddisfatti della comodità e dell'ordine in casa e in studio.
Disponibile
Disponibile
€ 6,15
€ 1,11
This strap handle is made of rubber and steel. It can be mounted easily to your flightcase!
Disponibile
Disponibile
€ 13,95
€ 7,20
-83%
This Penn Elcom double rack profile is 3U high and comes pre-drilled with holes at 15mm intervals for eased installation.
Disponibile
Disponibile
€ 21,90
€ 3,62
-58%
The Penn Elcom designed double bar handle has a recessed ABS body fitted with an aluminium handle to provide plenty of room to get a good grip. This flight case part is easily installed via eight pre-drilled mounting holes.
Disponibile
Disponibile
€ 14,30
€ 6,00
Il rinforzo ad angolo in zinco Penn Elcom è dotato di 2 fori e ha gli angoli arrotondati. Misura 32.2 x 19 mm ed è realizzato in zinco di 1,2 mm di spessore.
Disponibile
Disponibile
€ 2,96
€ 0,80
Il paraspigolo bombato Penn Elcom in acciaio color zinco dispone di 3 fori, ognuno dal diametro di 5 mm. Misura 41 x 41 ed è realizzato in acciaio di 1,2 mm di spessore.
Disponibile
Disponibile
€ 6,95
€ 1,34
This zinc-coloured Penn Elcom steel ball corner is equipped with six pre-drilled holes with a diameter of 5 mm each. Its dimensions are 65 x 65 mm and it is made of 1.8mm-thick steel.
Disponibile
Disponibile
€ 4,99
€ 3,80
This Penn Elcom designed flat corner has a 5mm internal radius and comes finished with a foot, making it the ideal finisher for the base of a flight case.
Disponibile
Disponibile
€ 4,79
€ 3,84
Easily installed via the four pre-drilled 5mm screw holes, this Penn Elcom dish is made from 1.2mm thick steel and can be used to mount a standard D-sized XLR socket exactly where it's needed.
Disponibile
Disponibile
€ 49,00
€ 7,65
The Penn Elcom C1150 medium flat corner has a 4mm internal radius and features three 5mm mounting holes. It's made of steel and is stackable in combination with its female counterpart (C1935).
Disponibile
Disponibile
€ 2,29
€ 2,09
This 50mm by 40mm Penn Elcom T-corner bracket comes in a zinc-coloured finish and has been pre-drilled with six 5mm mounting holes to ease installation.
Disponibile
Disponibile
€ 1,72
€ 1,49
Disponibile
Disponibile
€ 3,97
€ 2,71
The Penn Elcom E2215 U-shape extrusion is made of aluminium and is compatible with 9mm (3/8") thick boards, making it the ideal finishing touch for any self-built DJ furniture.
Disponibile
Disponibile
€ 11,50
€ 5,80
Penn Elcom vi offre un ottimo cassetto in acciaio per montaggio in un rack da 19", alto 3 U e dotato di serratura per poter tenere al sicuro tutta la vostra attrezzatura. Con cuscinetti a sfera per uno scorrimento fluido.
Disponibile
Disponibile
€ 895,00
€ 156,00
The rack is made of 2.0mm steel and is 16 U high. As there is a hole every 15 mm, you can mount whatever device you want with this rack.
Disponibile
Disponibile
€ 24,10
€ 12,80
The Penn Elcom H7150/85 backplate is made for mounting and reinforcing a Penn Elcom H7150Z flight case handle.
Disponibile
Disponibile
€ 3,08
€ 1,65
Want to compartmentalise a flight case? The Penn Elcom B1641z steel divider brace is compatible with 9.2mm (3/8") panels, measures 70 x 70 x 15mm and comes with pre-drilled screw holes.
Disponibile
Disponibile
€ 4,17
€ 1,91
Install this recessed 178mm by 127mm dish in the side or top of a touring rack or flight case to support the castor wheel of stacked cases or for labelling.
Disponibile
Disponibile
€ 6,95
€ 5,45
Made of black ABS plastic, this Penn Elcom cabinet handle can be grabbed from all four sides. It's comfortable to hold thanks to its large dimensions.
Disponibile
Disponibile
€ 8,15
€ 8,05
Neatly bundle cables, cut down on stress and cut down on detangle-time with this Penn Elcom designed cable tie. Finished in red, this hook-and-loop cable tie is 20cm long and 1.3cm wide.
Disponibile
Disponibile
€ 1,78
€ 0,62
The Penn Elcom B0700z brace is made of 1.2mm-thick steel, has a 1mm internal radius and comes with four 5mm pre-drilled mounting holes.
Disponibile
Disponibile
€ 0,83
€ 0,50
Need a sturdy hinge with a built-in stay to finish a custom flight case? The Penn Elcom P1955S is perfect for heavier lids.
Disponibile
Disponibile
€ 8,00
€ 6,80
Designed by Penn Elcom, this brace-and-ball-corner in one is made of steel and comes with a 30mm offset on one leg only, making it a solid piece of hardware for lidmaker extrusions.
Disponibile
Disponibile
€ 3,14
€ 1,49
L'angolo piatto Penn Elcom è progettato per offrire una protezione ottimale agli spigoli del vostro flight case: gli urti durante il trasporto non faranno più paura!
Disponibile
Disponibile
€ 3,44
€ 1,69
Disponibile
Disponibile
€ 3,17
€ 1,41
Il paraspigolo bombato Penn Elcom in acciaio color zinco dispone di 3 fori, ognuno del diametro di 5 mm. Misura 59 x 59 mm, è realizzato in acciaio e ha uno spessore di 1,5 mm.
Disponibile
Disponibile
€ 2,85
€ 0,95
This ball corner not only protects against impacts but reinforces your flight case at the same time. It's also easy to mount thanks to the three pre-drilled mounting holes.
Disponibile
Disponibile
€ 3,64
€ 1,40
This zinc dish, with a pre-punched hole, can be mounted to to your preference. You can provide it with an XLR D connector. Thanks to the pre-drilled holes you can use it immediately.
Disponibile
Disponibile
€ 5,30
€ 2,80
Polish off or modify a flight case or rack with the Penn Elcom D0506/07Z recessed ventilation dish and ensure optimised airflow. This 17.8mm by 12.7mm dish features four horizontal ventilation holes and is made from 1.2mm thick steel.
Disponibile
Disponibile
€ 8,60
€ 4,71
Need a simple steel handle to polish off a custom flight case? Then this piece of Penn Elcom hardware is just what you're looking for.
Disponibile
Disponibile
€ 4,74
€ 2,09
Questa robusta chiusura a farfalla Penn Elcom è dotata di un meccanismo avanzato che si apre e si chiude semplicemente ruotando la chiave. Senza resistenza e con una profondità di 16 mm.
Disponibile
Disponibile
€ 27,00
€ 12,40
Chiusura da installazione Penn Elcom realizzata in acciaio e rifinita in color cromo. Dotata di quattro fori di montaggio. È inoltre dotata di serratura, per garantirvi la massima sicurezza.
Disponibile
Disponibile
€ 19,55
€ 11,40
Un pannello frontale di Penn Elcom, in acciaio da 1,2 mm e con fori di ventilazione, rifinito in nero ed alto 2 U.
Disponibile
Disponibile
€ 10,50
€ 4,89
This Penn Elcom designed butterfly latch is made of steel and features a zinc finish. Lockable with tie-wraps, this recessed latch can be used to finish a flight case.
Disponibile
Disponibile
€ 10,00
€ 9,90
The Penn Elcom B1131 brace bracket is made of 1.2mm-thick steel, features six pre-drilled mounting holes and measures 51.5 by 42mm. The internal radius is 1.5mm.
Disponibile
Disponibile
€ 2,00
€ 0,83
The leather-look of this Penn Elcom designed handle adds a deluxe touch to any custom flight case. The handle is easy to install thanks to nickel-finished mounting plates.
Disponibile
Disponibile
€ 12,40
€ 9,25
Torna su