- Home /
- Prodotti /
- Studio e registrazione /
- Periferiche da studio /
- RME
Periferiche da studio RME
Sono stati trovati 14 prodotti
-32%
The RME M-16 DA is a digital-to-analogue converter with a -24 dBu hardware reference, MADI and an ADAT in/output with a sample rate of up to 192 kHz.
Disponibile
Disponibile
€ 3.561,00
€ 2.409,00
-32%
The M-32 DA is a digital-to-analogue converter by RME. It's equipped with a hardware reference of -24 dBu, MADI and an ADAT in/output with a sample rate of up to 192 kHz.
Disponibile
Disponibile
€ 4.173,00
€ 2.825,00
The advanced RME M-16AD digital-to-analogue converter is supported by a -24dBu hardware reference, MADI and an ADAT input and output with a maximum sample rate of 192kHz.
Disponibile
Disponibile
€ 3.249,00
€ 3.175,00
The RME DMC842 functions as an AES24 interface and an eight-channel digital microphone controller in one. This unit supports ADAT, AES/EBU, analogue connections and even optional MADI inputs and outputs.
Disponibile
Disponibile
€ 3.994,00
€ 3.279,00
The RME DMC842 functions as an AES24 interface and an eight-channel digital microphone controller in one. This unit boasts the same spec-sheet as the DMC842, but features a built-in i64 MADI card.
Disponibile
Disponibile
€ 5.473,00
€ 3.929,00
The RME ADI-6432 can be used as a front-end for the Hammerfall DSP MADI PCI audio interface and sets you up with 64 channels for MADI to AES/AES to MADI conversion.
Disponibile
Disponibile
€ 3.593,00
€ 3.069,00
The RME DTOX-32 breakout panel (rack) is designed to connect a male female AES/EBU to D-sub.
Disponibile
Disponibile
€ 395,00
€ 339,00
Following up the ADI-2 Pro-Series offering, the RME ADI-2/4 Pro SE is a masterpiece of a converter equipped with a newly-designed circuit that supports an even faster DSP - among other things.
Disponibile
Disponibile
€ 2.521,00
€ 2.499,00
The RME DTOX-16 I breakout panel (rack) is designed to connect male XLR to D-sub.
Disponibile
Disponibile
€ 392,00
€ 312,00
The highly advanced RME ADI-6432 Redundant 64-channel converter seamlessly transforms MADI signals into AES and back again and comes equipped with both BNC MADI ports and 32 AES/EBU inputs and outputs.
Disponibile
Disponibile
€ 4.666,00
€ 3.119,00
Since the launch of the M-32 AD and M-32 DA in 2010, a lot has happened in the world of converters. With shifted consumer demands in mind, RME present the updated M-32 AD Pro: a high-end converter equipped with extra functions.
Disponibile
Disponibile
€ 3.689,00
€ 3.139,00
The RME DTOX-16 O breakout panel (rack) is designed to connect female XLR to D-sub.
Disponibile
Disponibile
€ 392,00
€ 313,00
The M-32 DA is a digital-to-analogue converter by RME. It's equipped with a hardware reference of -24 dBu, MADI and an ADAT in/output with a sample rate of up to 192 kHz.
Disponibile
Disponibile
€ 4.173,00
€ 3.119,00
The RME DTOX-16 I/O breakout panel (rack) is designed to connect (passive) female and male XLR to D-sub.
E’ possibile ricevere entro 10 giorni lavorativi.
Entro 10 giorni lavorativi
€ 392,00
€ 322,00
Torna su
Precedente
1
Successivo