- Home /
- Prodotti /
- Microfoni /
- Microfoni da studio /
- Microfoni da studio a condensatore /
- Microfoni a condensatore a diaframma stretto /
- Audio Technica /
- Audio Technica AT2022 microfono stereo
Audio Technica AT2022 microfono stereo
Descrizione
If you are on the road often and want to create stereo recordings on location or need a complete stereo image from one microphone - the Audio Technica AT2022 is the microphone for you! It is equipped with two microphone capsules, which are used in an X/Y setup to achieve a stereo image without using two separate pencil microphones. The AT2022 has a switchable roll-off (up to 150 Hz) and is delivered including a windscreen, microphone clip, battery and carrying bag.
AT2022: battery-powered
A narrow (90-degree angle) as well as a wide (120-degree) stereo image can be selected. Make sure that you DON'T use a phantom power supply in combination with this microphone: the unidirectional condenser capsules are powered by an (accessory) AA battery. The cable features an XLRF connector on the microphone side and a 3.5mm mini jack connector on the other, to connect it to recorders or other devices. For lively stereo recordings on location, the AT2022 truly is a smart choice.
Consigli e osservazioni
- Attenzione: l'AT2022 può essere alimentato solamente a batterie. I cavi XLR con alimentazione phantom possono danneggiare lo strumento.
Specifiche
Caratteristiche
- Sensibilità microfono (dB/PA) -41
- Impedenza microfono 200 - 249 ohm
- Filtro Low Cut sì
- SPL massimo 120 - 129 dB
- Frequenza massima 20 - 20,9 kHz
- Accessori per microfono clip microfono, filtro anti vento, borsa / astuccio
- Frequenza minima 20 - 21 Hz
- Interruttore pad no
- Direttività stereo
- Stereo sì, microfono stereo
- Capsule sostituibili no
Peso e dimensioni imballaggio incluso
- Peso (imballaggio incluso) 400 gr
- Dimensioni (imballaggio incluso) 24,5 x 13,5 x 8,0 cm
Specifiche
- stereo microphone
- perfect for recording on location and overall stereo recordings
- pickup pattern: X/Y stereo
- frequency response: 20 Hz - 20 kHz
- LF roll-off: 150 Hz (6 dB/octave)
- sensitivity: -41 dB
- impedance: 200 ohms
- maximum SPL: 122 dB
- dynamic range: 103 dB
- signal/noise ratio: 75 dB
- battery: 1.5 V AA/UM3
- current draw: 1.2 mA
- battery life (average): 500 hrs
- weight: 270 grams
- length: 192 mm
- diameter: 21 mm (head: 65 mm)
- included: AT8405a microphone clip, windshield, battery and carrying bag