- Home /
- Prodotti /
- Flight case e borse /
- Adam Hall
Flight case e borse Adam Hall
Sono stati trovati 106 prodotti
-72%
Protect rack gear, make sure no one touches the settings and keep the controls in plain sight with this transparent plexiglass front panel. This 2U high panel is compatible with any standard 19 inch rack or flight case.
Disponibile
Disponibile
€ 31,00
€ 8,65
This little rubber foot from Adam Hall is a highly protective accessory that keeps your flight case, furniture or floor free from damage.
Disponibile
Disponibile
€ 0,93
€ 0,80
Secure a few of these Adam Hall rubber feet to the bottom of a flight case, guitar amp, or other gear to ensure a stable and firm base that keeps the floor scratch free. This is a single rubber foot.
Disponibile
Disponibile
€ 1,11
€ 0,90
Disponibile
Disponibile
€ 1,89
€ 1,26
Avoid damage to your flight case, furniture and the floor with this four-pack of stabilising rubber feet from Adam Hall. Easy to mount, each rubber foot comes including a steel washer and is 11mm high.
Disponibile
Disponibile
€ 4,03
€ 3,25
Place this anti-slip mat inside your 19" rack drawer to protect your gear against scratches and other kinds of damage caused by slipping and sliding during transport.
Disponibile
Disponibile
€ 6,70
€ 5,85
Secure a few of these Adam Hall rubber feet to the bottom of a flight case, guitar amp, or other gear to ensure a stable and firm base that keeps the floor scratch free. This pack includes four rubber feet.
Disponibile
Disponibile
€ 5,65
€ 4,11
This durable, 2mm thick steel rack rail comes pre-drilled with 3 holes per unit, offering masses of freedom in terms of configuration. This rail is a DIY rack or flight case customising essential.
Disponibile
Disponibile
€ 45,00
€ 23,90
Every opening in your rack leaves room for dust, dirt and moisture to make its way in and try to take out any electronic equipment. Specially designed for slimmer slots, this 0.5U blind plate from Adam Hall fits any standard 19" rack.
Disponibile
Disponibile
€ 11,50
€ 5,75
Secure a few of these Adam Hall rubber feet to the bottom of a flight case, guitar amp, or other gear to ensure a stable and firm base that keeps the floor scratch free. This is a single rubber foot.
Disponibile
Disponibile
€ 8,05
€ 5,95
A blind panel like the Adam Hall 8724STL not only seals and cleans up your rack, but keeps out dust and dirt. This flat steel version covers four units.
Disponibile
Disponibile
€ 18,20
€ 12,75
Easily installed in any standard 19 inch rack, this Adam Hall blind plate takes up two units, preventing dust and dirt from getting inside your rack.
Disponibile
Disponibile
€ 11,60
€ 6,00
Fill any gaps in your rack with the Adam Hall 87221STL Blind Plate and keep dust and dirt out of the sensitive inner working of your gear. This 19 inch plate is 1U high and made from 1.5mm thick steel.
Disponibile
Disponibile
€ 7,55
€ 4,16
This durable, 2mm thick steel rack rail comes pre-drilled with 3 holes per unit offering masses of freedom in terms of configuration. This rail is a DIY rack or flight case customising essential.
Disponibile
Disponibile
€ 12,10
€ 8,90
Easily installed to lock up a rack drawer or rack door, this cylinder lock comes with a set of two keys and offers maximum peace of mind.
Disponibile
Disponibile
€ 11,30
€ 7,40
The Adam Hall 372151 swivel castor wheel has a built-in brake and can be secured to flight cases as well as various LD Systems subwoofers. The distance between the mounting holes is 60mm / 80mm.
Disponibile
Disponibile
€ 22,00
€ 11,30
Disponibile
Disponibile
€ 9,45
€ 6,85
This 3U rack mount housing from Adam Hall isn't just a solid solution when mounting gear in a 19 inch rack, but boasts a steel construction complete with a ventilated top to ensure proper airflow for cooling.
Disponibile
Disponibile
€ 90,00
€ 79,00
Got a whole bunch of handheld microphones you need to keep safe? This 6U-sized foam rack insert from Adam Hall can take up to twenty-five.
Disponibile
Disponibile
€ 61,00
€ 49,00
Always handy: this pull-out shelf from Adam Hall provides a 35cm deep and 2U high rack storage space for stashing gear and accessories and keeping them within easy reach.
Disponibile
Disponibile
€ 90,00
€ 66,00
This 19-inch rack panel from Adam Hall supports pro-grade cable management and features cut-outs for two female XLR ports, six male XLR connectors and an IEC mains power port.
Disponibile
Disponibile
€ 17,05
€ 10,10
Made by Adam Hall, this slanted 1U rack panel allows you to secure eight D-size sockets at a 30-degree angle, while the pulling forces exerted on any plugs can be reduced using the included cable ties.
Disponibile
Disponibile
€ 45,00
€ 32,00
Equipped with a cylinder lock and made of steel, this 6U-sized rack drawer is a safe space for gear like microphones.
Disponibile
Disponibile
€ 165,00
€ 155,00
Wrangle all those faffy yet essential bits of stage and studio gear and neatly arrange them in a solid, locking drawer. The Adam Hall 87402 rack drawer can be installed in any 19 inch rack and takes up just two units of space.
Disponibile
Disponibile
€ 98,00
€ 78,00
This sturdy steel rack drawer by Adam Hall not only helps to keep your gear organised, but can be locked using the included keys.
Disponibile
Disponibile
€ 120,00
€ 93,00
Always handy, this Adam Hall designed rack box features a locking flap-style front lid, a 20cm installation depth and a 2U height to provide more then enough space to tuck away those essentials.
Disponibile
Disponibile
€ 71,00
€ 59,00
Wrangle all those faffy yet essential bits of stage and studio gear and neatly arrange them in a solid, locking drawer. The Adam Hall 87402 rack drawer can be installed in any 19 inch rack and takes up just two units of space.
Disponibile
Disponibile
€ 100,00
€ 81,00
Disponibile
Disponibile
€ 14,50
€ 6,00
The Adam Hall 87401E rack drawer is 1U high and offers room for your smallest accessories and touring essentials.
Disponibile
Disponibile
€ 95,00
€ 69,00
Keep your rack gear from running hot with the Adam Hall 8765 rack panel. This vented panel is 3U high and accommodates three cooling fans.
Disponibile
Disponibile
€ 21,60
€ 15,30
Neatly install sixteen XLR sockets in a 19 inch rack while taking up just 1U of space and keeps things clean and dust-free thanks to the Adam Hall 877213 rack panel.
E’ possibile ricevere entro 12 giorni lavorativi.
Entro 12 giorni lavorativi
€ 19,85
€ 14,70
E’ possibile ricevere entro 10 giorni lavorativi.
Entro 10 giorni lavorativi
€ 64,00
€ 46,00
E’ possibile ricevere entro 10 giorni lavorativi.
Entro 10 giorni lavorativi
€ 8,05
€ 7,95
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 73,00
€ 71,00
Provide your rack gear with proper ventilation, allow heat to dissipate and maintain flawless operation. This 1U ventilation plate is compatible with all 19 inch racks and features vertical vent openings to ensure ample airflow.
Ordina e ricevi gli articoli entro 6 settimane.
Circa 6 weken
€ 11,50
€ 6,55
Pack it all away inside the Adam Hall Orgaflex Pro shoulder bag and effectively organise all of your smaller essentials. This bag features a user-friendly pre-divided interior plus plenty of side pockets.
Ordina e ricevi gli articoli entro 4 settimane.
Circa 4 weken
€ 115,00
€ 113,00
E’ possibile ricevere entro 9 giorni lavorativi.
Entro 9 giorni lavorativi
€ 35,00
€ 33,00
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 58,00
€ 46,00
Made of steel, this 2U rack panel from Adam Hall allows you to mount twenty-four XLR ports and keep dust and dirt away from your gear at the same time.
E’ possibile ricevere entro 12 giorni lavorativi.
Entro 12 giorni lavorativi
€ 18,75
€ 11,20
E’ possibile ricevere entro 9 giorni lavorativi.
Entro 9 giorni lavorativi
€ 28,00
€ 20,30
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 17,70
€ 14,80
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 137,00
€ 99,00
Always handy, this Adam Hall designed rack box features a locking flap-style front lid, a 20cm installation depth and a 3U height to provide more then enough space to tuck away those essentials.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 83,00
€ 71,00
E’ possibile ricevere entro 10 giorni lavorativi.
Entro 10 giorni lavorativi
€ 10,70
€ 4,88
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 27,00
€ 17,95
E’ possibile ricevere entro 12 giorni lavorativi.
Entro 12 giorni lavorativi
€ 89,00
€ 69,00
Protect rack gear, make sure no one touches the settings and keep the controls in plain sight with this transparent plexiglass front panel. This 1U high panel is compatible with any standard 19 inch rack or flight case.
E’ possibile ricevere entro 10 giorni lavorativi.
Entro 10 giorni lavorativi
€ 24,70
€ 17,90
Torna su