Pannelli e adattatori per rack 19'' Adam Hall
Sono stati trovati 71 prodotti
Neatly mount twelve XLR sockets into a 19 inch rack while taking up just 1U of space and keeps things clean and dust-free thanks to the Adam Hall 877213 rack panel.
Disponibile
Disponibile
€ 12,30
€ 9,30
In
evidenza
evidenza
Almost all devices require proper ventilation and heat dissipation to maintain flawless operation. This 1U ventilation plate for your 19" rack features a perforated design to provide ample airflow.
Disponibile
Disponibile
€ 10,50
€ 6,05
This 19-inch rack tray supports non-standard gear with a depth of up to 375mm, features vented sides and comes with an upright rear edge for extra stability.
Disponibile
Disponibile
€ 35,00
€ 31,00
Since it has pre-drilled holes, this Adam Hall 8754 19" rack inlay is not only easy to install but supports various small bits of rack or flight case gear with non-standard dimensions.
Disponibile
Disponibile
€ 29,00
€ 24,75
Disponibile
Disponibile
€ 9,75
€ 4,88
Easily installed in any standard 19 inch rack, the Adam Hall 87475 3U panel helps mount your circuit breakers and efficiently organise your cables.
Disponibile
Disponibile
€ 44,00
€ 36,00
This 19-inch rack panel not only shields your gear, but helps keep it cool by allowing for airflow via the honeycomb-style mesh front.
Disponibile
Disponibile
€ 21,50
€ 14,90
Mount the Adam Hall 8756 rack tray in your open-top rack and gain 2U worth of room for gear like mixers and effects. Smaller bits of kit can be tied down with the included hook-and-loop fastening strip.
Disponibile
Disponibile
€ 52,00
€ 50,00
Finish your 19" rack or flight case in a professional manner by covering any open slots with this Adam Hall flat rack panel to better protect your equipment against dust, dirt and moisture. This is the 1U, steel version.
Disponibile
Disponibile
€ 9,95
€ 4,99
Made by Adam Hall, this steel rack mount housing has a 2U height and ventilated top panel to ensure proper airflow.
Disponibile
Disponibile
€ 80,00
€ 74,00
This 19-inch rack panel not only shields your gear, but helps keep it cool by allowing for airflow via the honeycomb-style mesh front.
Disponibile
Disponibile
€ 20,85
€ 16,35
This 19-inch rack tray supports non-standard gear with a depth of up to 375mm, features vented sides for airflow, and comes with an upright rear edge for extra stability.
Disponibile
Disponibile
€ 31,00
€ 26,00
This 19-inch rack panel not only shields your gear, but helps keep it cool by allowing for airflow via the honeycomb-style mesh front.
Disponibile
Disponibile
€ 19,65
€ 12,90
Polish off your 19-inch rack or flight case the professional way with this 1U aluminium blind plate from Adam Hall. This completely flat front plate keeps out dust and dirt, keeping your gear in optimum working condition.
Disponibile
Disponibile
€ 11,90
€ 7,15
Easily install smaller bits of equipment in your standard 19 inch rack with the help of this neat Adam Hall designed inlay. This model comes pre-drilled with various mounting hole patterns so it can accommodate most units.
Disponibile
Disponibile
€ 31,00
€ 24,75
Pre-punched with D-sized holes for mounting up to twelve XLR ports, the Adam Hall 872215 Panel is 1U high and even comes including cable binders to ensure proper strain relief.
Disponibile
Disponibile
€ 18,95
€ 10,65
Organise your cabling safely and neatly with this 19" front plate fitted with a brush strip for efficient cable feeding and dust-free operation. This version is 1U in height.
Disponibile
Disponibile
€ 22,80
€ 15,90
Finished with lots of tiny holes, the Adam Hall 87223VR ventilation panel helps keep your rack equipment nice-and-cool. This 3U-sized panel is made from steel and features a durable powder-coating.
Disponibile
Disponibile
€ 21,70
€ 9,40
Seal off your rack with this 3U-sized blind plate by Adam Hall and be assured that dust and dirt won't be able to make its way in and harm your gear.
Disponibile
Disponibile
€ 20,95
€ 13,40
Disponibile
Disponibile
€ 10,40
€ 5,35
This vented front plate from Adam Hall comes with circular cut-outs to keep the gear inside your 19-inch rack or flight case cool. It's 2U high and made of steel.
Disponibile
Disponibile
€ 16,10
€ 6,90
Need something to house somewhat larger gear? This steel rack drawer from Adam Hall offers 4U of room and features a built-in cylinder lock.
Disponibile
Disponibile
€ 125,00
€ 104,00
Easily installed in any standard 19 inch rack, this Adam Hall blind plate takes up two units, preventing dust and dirt from getting inside your rack.
Disponibile
Disponibile
€ 14,00
€ 8,80
Keep your rack gear from running hot with the Adam Hall 8763 rack panel. This vented panel is 3U high and accommodates two cooling fans.
Disponibile
Disponibile
€ 23,90
€ 16,40
In
evidenza
evidenza
This 2U-high drawer inlay is made of firm foam-rubber and pre-moulded to offer four wireless microphones, four bodypacks and all the necessary cables and batteries their own snug compartment.
Disponibile
Disponibile
€ 46,00
€ 42,00
Always handy: this pull-out shelf from Adam Hall provides a 38cm deep and 1U high storage space for stashing gear and accessories and keeping them within easy reach.
Disponibile
Disponibile
€ 80,00
€ 51,00
-72%
Protect rack gear, make sure no one touches the settings and keep the controls in plain sight with this transparent plexiglass front panel. This 2U high panel is compatible with any standard 19 inch rack or flight case.
Disponibile
Disponibile
€ 31,00
€ 8,65
Place this anti-slip mat inside your 19" rack drawer to protect your gear against scratches and other kinds of damage caused by slipping and sliding during transport.
Disponibile
Disponibile
€ 6,70
€ 5,85
Every opening in your rack leaves room for dust, dirt and moisture to make its way in and try to take out any electronic equipment. Specially designed for slimmer slots, this 0.5U blind plate from Adam Hall fits any standard 19" rack.
Disponibile
Disponibile
€ 11,50
€ 5,75
A blind panel like the Adam Hall 8724STL not only seals and cleans up your rack, but keeps out dust and dirt. This flat steel version covers four units.
Disponibile
Disponibile
€ 18,20
€ 12,75
Easily installed in any standard 19 inch rack, this Adam Hall blind plate takes up two units, preventing dust and dirt from getting inside your rack.
Disponibile
Disponibile
€ 11,60
€ 6,00
Fill any gaps in your rack with the Adam Hall 87221STL Blind Plate and keep dust and dirt out of the sensitive inner working of your gear. This 19 inch plate is 1U high and made from 1.5mm thick steel.
Disponibile
Disponibile
€ 7,55
€ 4,16
Easily installed to lock up a rack drawer or rack door, this cylinder lock comes with a set of two keys and offers maximum peace of mind.
Disponibile
Disponibile
€ 11,30
€ 7,40
This 3U rack mount housing from Adam Hall isn't just a solid solution when mounting gear in a 19 inch rack, but boasts a steel construction complete with a ventilated top to ensure proper airflow for cooling.
Disponibile
Disponibile
€ 90,00
€ 79,00
Got a whole bunch of handheld microphones you need to keep safe? This 6U-sized foam rack insert from Adam Hall can take up to twenty-five.
Disponibile
Disponibile
€ 61,00
€ 49,00
Always handy: this pull-out shelf from Adam Hall provides a 35cm deep and 2U high rack storage space for stashing gear and accessories and keeping them within easy reach.
Disponibile
Disponibile
€ 90,00
€ 66,00
This 19-inch rack panel from Adam Hall supports pro-grade cable management and features cut-outs for two female XLR ports, six male XLR connectors and an IEC mains power port.
Disponibile
Disponibile
€ 17,05
€ 10,10
Made by Adam Hall, this slanted 1U rack panel allows you to secure eight D-size sockets at a 30-degree angle, while the pulling forces exerted on any plugs can be reduced using the included cable ties.
Disponibile
Disponibile
€ 45,00
€ 32,00
Equipped with a cylinder lock and made of steel, this 6U-sized rack drawer is a safe space for gear like microphones.
Disponibile
Disponibile
€ 165,00
€ 155,00
Wrangle all those faffy yet essential bits of stage and studio gear and neatly arrange them in a solid, locking drawer. The Adam Hall 87402 rack drawer can be installed in any 19 inch rack and takes up just two units of space.
Disponibile
Disponibile
€ 98,00
€ 78,00
This sturdy steel rack drawer by Adam Hall not only helps to keep your gear organised, but can be locked using the included keys.
Disponibile
Disponibile
€ 120,00
€ 93,00
Always handy, this Adam Hall designed rack box features a locking flap-style front lid, a 20cm installation depth and a 2U height to provide more then enough space to tuck away those essentials.
Disponibile
Disponibile
€ 71,00
€ 59,00
Wrangle all those faffy yet essential bits of stage and studio gear and neatly arrange them in a solid, locking drawer. The Adam Hall 87402 rack drawer can be installed in any 19 inch rack and takes up just two units of space.
Disponibile
Disponibile
€ 100,00
€ 81,00
Disponibile
Disponibile
€ 14,50
€ 6,00
The Adam Hall 87401E rack drawer is 1U high and offers room for your smallest accessories and touring essentials.
Disponibile
Disponibile
€ 95,00
€ 69,00
Keep your rack gear from running hot with the Adam Hall 8765 rack panel. This vented panel is 3U high and accommodates three cooling fans.
Disponibile
Disponibile
€ 21,60
€ 15,30
Neatly install sixteen XLR sockets in a 19 inch rack while taking up just 1U of space and keeps things clean and dust-free thanks to the Adam Hall 877213 rack panel.
E’ possibile ricevere entro 12 giorni lavorativi.
Entro 12 giorni lavorativi
€ 19,85
€ 14,70
Torna su