DAP DRX-12A cassa attiva
Descrizione
Are you looking for a reliable active full-range speaker with a roadproof housing and a lot of spirit? Here you are: the DRX-12A by DAP Audio. It is equipped with a 12-inch woofer which ensures that this unit starts working from 50 Hz onwards. The bass reflex construction provides additional pressure in the low frequencies, for optimal speaker output in large spaces. The 1-inch horn driver has a dispersion of 50 x 50 degrees. A 15mm thick plywood housing with scratchproof black lacquer protects the interior of the speaker. Internal reinforcements attenuate unwanted resonance and make the DRX-12A even more durable.
DAP DRX-12A: properties
The amplifier of the DRX-12A is a bi-amp model, which means that the woofer and compression driver are separately powered and therefore aren't influenced by peaks in the overall signal. The 12-inch woofer is continuously provided with 200 watts and 30 watts are allocated for the high frequencies. With a maximum SPL of 122 dB, the sound pressure that is produced is more than enough for countless locations. A clip-indicator tells you when the sound is too loud. At the rear a combined jack/XLR input and link-out (XLR) are featured. Powerful, durable and attractively priced: the DAP DXR-12A!
Specifiche
Caratteristiche
- Bluetooth no
- Diametro del woofer 12'' (305 mm)
- Diametro tweeter 1" (25,4 mm)
- Sustainable product not specified
- Adatto all'uso come monitor no
- Peso per cassa 18 kg
- Equalizzatore integrato no
- SPL massimo 120 - 129 dB
- Frequenza massima 20 - 20,9 kHz
- Frequenza minima 50 - 59 Hz
- Potenza RMS 200 - 349 watt
- Analogue audio input type balanced line in (TRS jack), balanced line in (XLR)
- Analogue audio output type thru (XLR)
- Uscita per cassa passiva no
Peso e dimensioni imballaggio incluso
- Peso (imballaggio incluso) 18,0 kg
- Dimensioni (imballaggio incluso) 65,0 x 45,0 x 44,0 cm
Specifiche
- active full-range speaker
- 2-way system
- ventilated bass reflex housing
- size woofer: 12 inches
- size compression driver: 1 inch
- bi-amping amplifier module
- continuous power LF: 200 watts
- continuous power HF: 30 watts
- frequency response (-6 dB): 50 Hz - 20 kHz
- maximum SPL: 122.2 dB
- volume control
- switchable ground lift
- horn dispersion: 50 x 50 degrees
- housing: 15mm plywood
- finish: black, scratchproof lacquer
- stand fastening 35mm, ABS
- optional: eye bolts and distance rod
- dimensions: 574 x 371 x 360 mm
- weight: 18 kg
Connectors:
- input: XLR/jack combination
- link output (XLR)
Recensioni
Recensioni da altri paesi
Tradurre tutte le recensioni in Italiano
Heb 2 van deze speakers met 1 sub woofer...prima set voor dat geld en de geluidskwaliteit is redelijk goed...bij hogere volumes iets te schel maar dat valt in te stellen op mijn mengpaneel.
Wel worden de koellichamen erg warm en beginnen zelfs te stinken als je op 90% van het volume draait.
heb het volume terug moeten draaien om het stinken tegen te gaan..daarna de hele avond prima verder gedraaid.
Echter ga ik de koellichamen van ventilatoren voorzien.
2 a 3 ventilatoren per speaker van 60 x 60 mm x 20 mm.
Weet nog niet wat het resultaat zal zijn....dat geef ik later wel door in mijn review
Prima topjes, Gebruik ze wekelijks en ben er behoorlijk tevreden mee! Zuiver en hard geluid!
2 stuks van in gebruik! Zeer positief over. Samen met de 12 inch subs een ideale geluidskwaliteit voor grotere zalen.
Ik heb 2 van deze speakers aangeschaft als topkastjes.
Als aanvulling op mijn set voldoet deze prima.
Mooi helder geluid dat niet vervormd als deze op hoog volume staat.
zeker een aanrader als topjes