Penn Elcom
Sono stati trovati 535 prodotti
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 2,82
€ 1,66
The Penn Elcom B1130-25 brace has a 2mm as well as a 5mm internal radius, making it that bit more flexible. It's made of steel and comes with four 5mm pre-drilled mounting holes.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 1,20
€ 0,42
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 4,59
€ 2,44
The Penn Elcom H1078z flight case handle is easily installed via the pre-drilled holes and comes finished with a comfy rubber grip and a spring-loaded mechanism to keep it neatly tucked in after use.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 6,30
€ 4,03
Building your own black-edition flight case? Finish it in style with the Penn Elcom C1339/30K black ball corner. Made of 1.8mm-thick steel, this strong three-legged ball corner has an internal radius of 2.5mm and a 30mm offset. Each leg has two 5mm mounting holes.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 4,07
€ 2,77
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 1,05
€ 0,43
Ordina e ricevi gli articoli entro 5 settimane.
Circa 5 weken
€ 2,24
€ 0,88
Ideal for reinforcing the corner of a box or flight case, the Pen Elcom C1819k box corner is made from steel, features a 12mm internal radius and comes in black.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 4,98
€ 1,15
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 2,25
€ 0,88
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 2,58
€ 1,04
Keep your cables neatly organised with the Penn Elcom T1513/300 cable binder. This yellow edition is 30cm long and 1.3cm wide.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 2,22
€ 0,88
Finish your flight case with ball corners like the Penn Elcom C0658z large offset ball corner and be assured of maximum strength and protection.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 4,64
€ 2,50
Specially designed for the Penn Elcom EG-0522/2 profile, this female corner bracket is made from solid steel and comes pre-drilled with four mounting holes.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 3,30
€ 1,23
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 7,45
€ 6,50
Small yet mighty, the Penn Elcom L0914z Mini butterfly latch is made from solid 1.5mm-thick steel and comes pre-drilled with 4.2mm mounting holes for easy installation. Ideal for smaller DIY touring cases.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 9,40
€ 5,75
Specially designed for Penn Elcom W0985 and W0990 castor wheels, the W009 wheel plate is made from solid aluminium and comes pre-drilled with mounting holes configured to match the base of a castor wheel.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 8,05
€ 6,60
Made of steel, this Penn Elcom-designed ball corner protects the contents of your custom flight case against bumps and knocks. This model is stackable and comes with three mounting holes.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 4,54
€ 2,31
When it comes to touring, preparation and organisation are key. As such, it's never a bad idea to furnish your flight case with this tour label dish from Penn Elcom so you always know exactly what's (supposed to be) inside.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 18,45
€ 8,05
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 11,05
€ 8,90
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 4,60
€ 1,34
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 14,90
Made of rubber, this Penn Elcom strap handle is a solid finishing touch for any self-built flight case.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 4,46
€ 2,77
Build smooth-rolling drawers into a rack with this pair of Penn Elcom-designed drawer rails. Made from solid steel, these rails can bear up to 45 kilos and slide out for a total length of 802mm.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 16,45
€ 11,60
This back cover is made for the Penn Elcom H1028 cabinet handle. It's fashioned from ABS plastic and features four pre-drilled mounting holes.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 6,20
€ 4,15
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 9,45
€ 6,35
Build smooth-rolling drawers into a rack with this pair of Penn Elcom-designed drawer rails. Made from solid steel, these rails can bear up to 45 kilos and slide out for a total length of 702mm.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 15,00
€ 10,10
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 12,00
€ 10,30
One of the best ways to finish a flight case is by mounting ball corners like the Penn Elcom C1341. This stackable ball corner comes with six pre-drilled mounting holes and has a 35mm offset.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 4,97
€ 2,59
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 21,25
€ 19,40
The Penn Elcom H1435 spring shackle comes pre-installed in a dish with four mounting holes. Its spring-loaded design ensures it always snaps back into its original position.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 10,50
€ 8,40
Made of 2mm-thick steel, this heavy-duty ball corner protects your flight case where it's most vulnerable. Not only that, its round shape mitigates any damage done to other objects.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 5,90
€ 2,09
This Penn Elcom double rack profile is 18U high and comes pre-drilled with holes at 15mm intervals for eased installation.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 34,00
€ 17,60
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 10,70
€ 7,10
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 3,73
€ 1,00
The cambered design of the Penn Elcom H1052S spring-loaded fight case handle is far easier to install than a recessed handle, especially since it comes pre-drilled with six screw holes.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 16,85
€ 15,30
The Penn Elcom 6060 is a 1.7 metre-long aluminium rack extrusion with a sliding system.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 20,65
€ 15,80
E’ possibile ricevere entro 5 giorni lavorativi.
Entro 5 giorni lavorativi
€ 12,15
€ 4,91
Thanks to pre-drilled mounting holes, this zinc-plated Penn Elcom castor wheel is easy to secure to a flight case. Made of steel, this 64mm-diameter castor supports up to 40kg loads.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 17,35
€ 16,30
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 7,55
€ 6,60
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 42,00
€ 19,50
This double rack profile from Penn Elcom comes with die-cut holes that have been spread 15mm apart for flexible gear installation. This model has a 16U height.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 28,00
€ 15,90
For eased gear-installation, this double rack profile from Penn Elcom features die-cut holes every 15mm and measures 14U in height.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 29,00
€ 14,20
This Penn Elcom double rack profile is 12U high and comes pre-drilled with holes at 15mm intervals for eased installation.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 34,00
€ 12,40
This Penn Elcom double rack profile is 10U high and comes pre-drilled with holes at 15mm intervals for eased installation.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 24,15
€ 10,70
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 22,15
€ 7,20
This Penn Elcom double rack profile is 5U high and comes pre-drilled with holes at 15mm intervals for eased installation.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 21,10
€ 6,25
This Penn Elcom double rack profile is 4U high and comes pre-drilled with holes at 15mm intervals for eased installation.
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 21,10
€ 5,45
E’ possibile ricevere entro 11 giorni lavorativi.
Entro 11 giorni lavorativi
€ 8,65
€ 6,65
Torna su