- Home /
- Prodotti /
- Tralicci e stativi /
- Stativi e tralicci per luci /
- Duratruss
Stativi e tralicci per luci Duratruss
Sono stati trovati 320 prodotti
In
evidenza
evidenza
This is the Duratruss DT Eye Screw M10. This small yet strong piece of hardware is able to support a maximum load of 230kg.
Disponibile
Disponibile
€ 6,05
€ 3,11
In
evidenza
evidenza
The Duratruss DT Jr Clamp is a smaller-than-average clamp for suspending lighting fixtures. Effortlessly mount pars or spots to 35mm truss tubes.
Disponibile
Disponibile
€ 10,10
€ 5,55
The Duratruss DT Mini 360 Wing truss clamp is compatible with 48 to 51mm truss bar diameters and has a maximum load bearing capacity of 100kg. Made of aluminium, this single-clamp is secured with wing nuts.
Disponibile
Disponibile
€ 14,00
€ 8,30
This conical connector is used to connect a wide range of truss parts of the Duratruss 32, 33 and 34 systems.
Disponibile
Disponibile
€ 15,45
€ 11,50
In
evidenza
evidenza
The Duratruss DT Jr self-locking truss clamp offers a safe working load of up to 50kg and comes finished in unobtrusive black.
Disponibile
Disponibile
€ 19,10
€ 11,00
In
evidenza
evidenza
The Duratruss DT Selflock Clamp/BLK is a handy truss clamp that has a 50mm clamping range and offers a maximum load bearing capacity of 250kg.
Disponibile
Disponibile
€ 25,00
€ 17,90
The Duratruss DT31/2 1-point truss tube can be secured via the included conical connector and pair of bolts and splints. This quick-coupling system ensures a secure connection and smooth assembly as well as disassembly.
Disponibile
Disponibile
€ 62,00
€ 56,00
In
evidenza
evidenza
La DT 22-23-24 è una spina conica che serve per unire i giunti di collegamento conici al traliccio. Per unire un giunto servono due di queste spine. Le copiglie assicureranno poi che le spine coniche rimangano sempre ben fisse.
Disponibile
Disponibile
€ 3,08
€ 1,37
The Duratruss DT Mini 360 is a truss clamp with a 50mm tube capacity and a maximum weight capacity of 100kg and comes painted black.
Disponibile
Disponibile
€ 11,25
€ 4,66
In
evidenza
evidenza
With the Duratruss ST-3800B, you can raise your truss system or t-bar up to 3.8 metres in height. It uses a reliable direct gear wheel system and it's robust, extremely stable, lightweight and easy to set up too.
Disponibile
Disponibile
€ 265,00
€ 250,00
In
evidenza
evidenza
Il Duratruss ST-TA400 è un adattatore per traliccio progettato appositamente per lo stativo wind-up Duratruss ST-2800B-ECO. Con larghezza fino a 400 mm, per fissare il traliccio allo stativo e portarlo a 2,80 m di altezza.
Disponibile
Disponibile
€ 69,00
€ 46,00
In
evidenza
evidenza
Un giunto per fissare facilmente un traliccio alla piastra di base. Questo mezzo giunto viene fissato tramite una filettatura interna (M10) alla piastra di base. Il traliccio viene fissato tramite il raccordo conico.
Disponibile
Disponibile
€ 8,90
€ 6,90
In
evidenza
evidenza
The Duratruss DT31/2 1-point truss tube can be secured via the included conical connector and pair of bolts and splints. This quick-coupling system ensures a secure connection and smooth assembly as well as disassembly.
Disponibile
Disponibile
€ 79,00
€ 53,00
Designed for building truss structures, the Duratruss DT Mini 360 Swivel Clamp can be secured to truss beams with a 48mm to 51mm diameter and carry loads of up to 100 kilograms.
Disponibile
Disponibile
€ 19,10
€ 8,80
The Duratruss DT 34 has main tubes with a diameter of 50 mm and cross tubes of 20 mm and their wall thickness is 2 mm. This DT 34 truss has two 0.5m parts in a corner of 90 degrees plus a straight part that goes upwards.
Disponibile
Disponibile
€ 575,00
€ 352,00
Le serie DT 23, 32, 33 e 34 comprendono i tralicci più venduti al mondo. Sono serie molto popolari grazie alla loro struttura leggera ed alla portata elevata di cui sono capaci. Questa copiglia di sicurezza viene utilizzata per assicurare il collegamento dei tralicci.
E’ possibile ricevere entro 5 giorni lavorativi.
Entro 5 giorni lavorativi
€ 2,02
€ 0,21
The Duratruss DT Mini 360 is a truss clamp with a 50mm tube capacity and a maximum weight capacity of 100kg.
Disponibile
Disponibile
€ 9,45
€ 6,75
Built for suspending heftier gear from truss systems, the Duratruss DT Narrow Clamp is compatible with 50mm truss beams and has a maximum weight-bearing capacity of 200 kilograms.
Disponibile
Disponibile
€ 17,85
€ 13,90
The DT23-150 is a light-weight decorative truss, ideal for showrooms and pubs, with has all the charm of an actual truss. The main tubes are 35 mm in diameter, making them easy to distinguish from the braces.
Disponibile
Disponibile
€ 255,00
€ 249,00
The DT 32, 33, and 34 are the best selling truss systems. This steel pin has an M8 screw thread and connects truss parts.
Disponibile
Disponibile
€ 4,79
€ 3,19
The Duratruss DT Mini 360 Wing truss clamp is compatible with 48mm to 51mm tube diameters and offers a maximum load-bearing capacity of 100kg.
Disponibile
Disponibile
€ 12,60
€ 8,55
The Duratruss DT Selflock Clamp can be secured to truss beams with maximum diameter of 50mm and boasts a massive maximum weight-bearing capacity of 250 kilograms.
Disponibile
Disponibile
€ 25,00
€ 17,20
The Duratruss ST-PMB is a T bar for the Duratruss ST-2800B-ECO wind-up stand. It features three rigging points per side.
Disponibile
Disponibile
€ 82,00
€ 67,00
Part of the DT31-Series from Duratruss, this black-finished aluminium truss tube is 150cm long, has a 50mm diameter, and a wall-depth of 2mm. This tube comes bundled up with a conical coupler, two bolts, and two locking pins.
Disponibile
Disponibile
€ 98,00
€ 83,00
The Duratruss DT Trigger Clamp can bear up to 250 kilograms - ideal for safely and securely suspending gear from a 50mm truss pipe.
Disponibile
Disponibile
€ 23,80
€ 16,30
Built for suspending heftier gear from truss systems, the Duratruss DT Narrow Clamp is compatible with 50mm truss beams and has a maximum weight-bearing capacity of 200 kilograms.
Disponibile
Disponibile
€ 17,65
€ 10,30
Il Duratruss DT Pro è un robusto gancio rotante con il quale potrete collegare due tralicci tra loro; questo accessorio piccolo ma indispensabile ha una portata massima di 500 kg ed è adatto per tubi di 50 mm.
Disponibile
Disponibile
€ 33,00
€ 28,00
This is the Duratruss DT Eye Nut M10. This small yet strong piece of hardware is able to support a maximum load of 230kg.
Disponibile
Disponibile
€ 4,77
€ 2,47
The Duratruss DT Trigger Clamp can bear up to 250 kilograms - ideal for safely and securely suspending gear from a 50mm truss pipe.
Disponibile
Disponibile
€ 24,15
€ 16,50
With this 60 x 60cm baseplate you can easily build compact and solid totems. The baseplate is suited for trusses from the 30 series by Eurotruss and Duratruss.
Disponibile
Disponibile
€ 166,00
€ 142,00
The Duratruss DT 32 has main tubes with a diameter of 50 mm and cross tubes of 20 mm and their wall thickness is 2 mm. This DT 32 is one metre long.
Disponibile
Disponibile
€ 139,00
€ 111,00
Disponibile
Disponibile
€ 191,00
€ 169,00
The Duratruss JR Clamp Pro-35M is suited for truss systems with 35mm main tubes. The half-coupler has a maximum weight capacity of 100 kilograms. Always combine the half-coupler with a safety!
Disponibile
Disponibile
€ 15,95
€ 9,30
The Duratruss Snap Clamp is compatible with 50mm diameter truss tubes, can bear up to 200 kilograms in weight and comes in a clean matte-black.
Disponibile
Disponibile
€ 23,60
€ 12,60
A heavyweight among truss couplers, the Duratruss DT Pro Clamp boasts a maximum load capacity of 500 kilograms.
Disponibile
Disponibile
€ 22,40
€ 14,70
Raise your truss to a height of up to 4.5 metres with ease using the highly durable and dependably stable Duratruss ST-4500P wind-up stand.
Disponibile
Disponibile
€ 955,00
€ 785,00
The DT-BPS 650 baseplate has been developed for the DT 33, 34, 43, and 44 truss systems by Duratruss. This round baseplate has a diameter of 65 cm, is 1.5 cm thick and features four half truss eggs - perfect for truss totems or a truss square.
Disponibile
Disponibile
€ 334,00
€ 259,00
Lo stativo wind-up Duratruss ST-2800B-ECO vi permetterà di sollevare in tutta semplicità le vostre barre a T o sistemi di tralicci, fino a 2,8 metri di altezza! Leggero, molto stabile e con sistema affidabile a ruote dentate.
Disponibile
Disponibile
€ 239,00
€ 198,00
This black, 100cm-long truss tube is part of the DT31 Series by Duratruss. It has a 50mm diameter, the walls are 2mm thick and the tube comes complete with a conical coupler, two bolts and two splints.
Disponibile
Disponibile
€ 76,00
€ 59,00
Use the Duratruss DT23 C53-XD X-joint to connect one vertical and four horizontal truss elements (apex down).
Disponibile
Disponibile
€ 509,00
€ 466,00
Disponibile
Disponibile
€ 197,00
€ 153,00
The Duratruss M10 BPL screw can be used to mount the M10 half-connectors to the Duratruss column baseplates. Each plate requires four screws.
Disponibile
Disponibile
€ 3,10
€ 2,37
The Duratruss DT 32 has main tubes with a diameter of 50 mm and cross tubes of 20 mm and their wall thickness is 2 mm. This DT 32 has a length of 1.5 metres.
Disponibile
Disponibile
€ 163,00
€ 101,00
The Duratruss DT 34 has main tubes with a diameter of 50 mm and cross tubes of 20 mm and their wall thickness is 2 mm. This DT 34 has a length of 1.5 metres.
Disponibile
Disponibile
€ 336,00
€ 206,00
Disponibile
Disponibile
€ 29,00
€ 17,20
Disponibile
Disponibile
€ 235,00
€ 152,00
This Duratruss Spacer is suited for DT 31, 32, 33, 34, 43, 44 truss systems and has a length of 105 millimetres. It connects DT parts and creates more space between them.
Disponibile
Disponibile
€ 30,00
€ 15,40
E’ possibile ricevere entro 5 giorni lavorativi.
Entro 5 giorni lavorativi
€ 21,70